Table of Contents
Advertisement
10.1.
Batten tensioner
Tools needed:
- hex key 4mm
Parts: Batten tensioner set
1.
Assemble the batten tensioner
2.
Place the batten tensioner over the batten.
3.
Plug in the stift.
76.
4.
Insert in the sail and place the loop over the hooks
and bridge.
5.
Tighten the batten just until a little tension is on the
batten.
6.
Use the line where the inner part meets the batten as
a reference line to always get the same setting.
Advertisement
Table of Contents
