Kick Up Rudder - Nacra 500 MK2 Assembly Manual

5.1.

Kick up rudder

Tools needed:
- Wrench 7/16 or 11mm
- Flat screwdriver
- Grease
- Adjustable spannner
2x
1.
Assemble the upper and lower casting on the rudderblade.
Use a flat screwdriver and grease.
2.
Use the self locking slot for the nylock nut at the port side
of the casting.
3.
Put the boat on a high support or a trailer to align the
rudders high enough to lock down the rudders.
4.
First place the lower pin through the lower casting.
5.
Put the top pin through the lower casting.
37.