Bridle With Connector - Nacra 500 MK2 Assembly Manual

1.5.

Bridle with connector

20mm
1x
18.
1.
Mount the bridle wires on the bridle connector. Use the
clevis pins 1/2 x 1/4.
2.
Connect the bridle to the bridle pins.
If you are installing a spinnaker kit also do the
following steps.
3.
For a snuffer system: Install the ring 3x20 ss under the fork
terminal on port side as shown in the picture.
4.
For the 500MK2: Install bowsprit connector plates on
both bridle terminals.
500mk2 only
1x
1/2 x 1/4
2x
2x
2x