Table of Contents
Advertisement
Spinnaker halyard
1.
Feed the spinnaker halyard(blue in the overview) coming
from the mast block from aft to forward through the aft
port block on the bowsprit.
2.
Feed the forward end through the double block.
3.
Feed it back up through the starboard aft block on the
bowsprit.
4.
Feed the spinnaker halyard through the spinnaker cleat
pivot block on the mast.
5.
Next, thread it through the ring on the front of the
trampoline.
6.
Proceed to thread this end through the ring attached to
the shock cord on the rear of the trampoline.
7.
Thread the same end through the oval grommet and
through the eyelet in the snuffer bag.
8.
Use a batten to feed the end all the way to the front of the
snufferbag.
9.
Thread the end through the retriever patches on the
spinnaker and knot it to the highest patch.
10.
Finish by attaching the loose end, coming from the mast,
to the top of the spinnaker.
92.
Advertisement
Table of Contents
