Nacra 500 MK2 Assembly Manual page 93

Table of Contents

Advertisement

Spinnaker tack
11.
Attach one end of the tack to the eyestrap on the
bowsprit using a bowline.
12.
Thread the loose end through the double block and
back to the forward block on the bowsprit.
13.
Attach this end to the tack of the spinnaker.
Spinnaker sheet
14.
Knot the middle of the spinnaker sheet to the
spinnaker clew using a cow's hitch. Make sure the
sheet goes in front of the forestay and the spinnaker
is not twisted.
15.
Thread one end of the spinnaker sheet through one of
the outboard spinnaker blocks.
16.
Then through the return blocks fixated on the front
crossbar.
17.
Across the trampoline and through the spinnaker
sheet ring.
18.
Make a figure 8 knot in the end of the line.
19.
Repeat for the other sheet mirrored.
20.
Pull the spinnaker into the snufferbag using the
spinnaker halyard coming out of the oval grommet.
93.

Advertisement

Table of Contents
loading

Table of Contents