Terminal And Connector For I/O - Panasonic LP-S Series Maintenance Manual

3-3-2 Terminal and connector for I/O

The I/O terminal block and the I/O connector are available as the external control I/O interface of this product.
• I/O terminal block: Loaded with the basic input/output to control the laser marker.
• I/O connector: Loaded with the input/output for data configuration such as selecting a file number and the input/output
for the specific functions.
I/O connector
(Laser marker)
• Before using I/O, configure the environment settings. Refer to "3-2 Before External Control" (P.81).
Rear of controller
ME-LPS-SSM-8
Y1 X1
Y2 X2
Y3 X3
Y4 X4
Y5 X5
Y6 X6
Y7 X7
Y8 X8
Y9 X9
Y10 X10
Y11 X11
Y12 X12
Y13 X13
Y14 X14
X15
X16
X17
X18
X19
X20
I/O terminal block
87