Controller - Panasonic LP-S Series Maintenance Manual

2-2-2 Controller

„ Front
8
7
1
6
1. Key switch: POWER
This key switch is used to start the laser marker system.
Turn ON (|) the switch to start-up the system, and turn OFF (O) the switch to shutdown
the system.
Only when the key switch is turned OFF (in O position), the key can be pulled out.
When the laser marker is not in use, the key should be in safekeeping by a laser safety
manager.
In case of turning ON the power supply after turning OFF, leave the interval five seconds or more between ON and
OFF.
Do not turn off the power supply while the system starts (during MAIN indicator is flashing).
2. Controller display panel
The indicator that shows the status of laser radiation and the laser
marker.
No. Display name
FILE No. / ERROR CODE
q
MAIN
w
MARKING
e
46
10
2
5
4
3
9
Status
Normal state
Alarm or warning status
System is powered on
System under starting up
(uncompleted)
Being in laser emitting
ME-LPS-SSM-8
OFF
w
e
Indication
Displays selected file No.
Displays error code No. Refer to
"Error Indication" (P.161).
Green lighted-up
Green flashing
Orange lighted-up
ON
q