How To Read This Document - Panasonic LP-S Series Maintenance Manual

Laser marker
Hide thumbs Also See for LP-S Series:
Table of Contents

Advertisement

How to Read this Document

„ Symbol indications
"Notice" denotes any instructions or precautions for using this product. To prevent the damage or
malfunction of the product, observe these precautions fully.
"Reference" denotes any hints for operation, detail explanations, or references.
„ Type of manuals
For this product, the following manuals are prepared. Read each manuals and operate this product correctly and safely.
Save the manuals for future use.
Safety / Setup / Maintenance Guide
This manual describes the safety precautions and the items required for the introduction, installation and maintenance of
this product.
• Precautions and safety measures: All users shall be required for reading this part.
• Specifications and outer dimensions
• Setup and connecting method
• I/O control method (signal layout, I/O rating, timing chart etc.)
• Maintenance
• Troubleshooting
Operation Manual
This manual describes how to operate the laser marker and set the marking data using touch panel console or monitor
and mouse.
Laser Marker NAVI plus Operation Manual
This manual describes how to operate the laser marker and set the marking data using PC setting software "Laser
Marker NAVI plus".
Serial Communication Guide
This manual describes the communication commands to control this product externally using the serial communication
(RS-232C/Ethernet). It describes the communication conditions, communication data formats, communication
commands, and the control samples.
Mainly the machine builder and system integrator shall be required for reading this manual.
• The PDF data of each manual is included on an attached CD-ROM "Laser Marker Utility".
• To read the PDF manual, Adobe Reader (Version X or later) of Adobe Systems Incorporated is required.
„ Target laser marker
This document is subject to the following Laser Marker models.
In this document, "laser marker" means this product.
If the setting contents or specifications vary by models, the target models are specified in the text.
In the text, multiple models may be described collectively, as shown in the table below.
Note that the illustration and screen images may vary with model.
Target model
LP-S200, LP-S200-CHN, LP-S200-SF, LP-S200-LS1
LP-S202, LP-S202-CHN, LP-S202-SF, LP-S202-LS1
LP-S205, LP-S205-CHN, LP-S205-SF, LP-S205-LS1
LP-S500, LP-S500-CHN, LP-S500-SF, LP-S500-LS1
LP-S502, LP-S502-CHN, LP-S502-SF, LP-S502-LS1
LP-S505, LP-S505-CHN, LP-S505-SF, LP-S505-LS1
LP-S500W, LP-S500W-CHN
LP-S505W, LP-S505W-CHN
Description in the text
LP-S200
LP-S2xx
LP-S202
LP-S205
LP-S500
LP-S5xx
LP-S502
LP-S505
LP-S500W
LP-S5xxW
LP-S505W
ME-LPS-SSM-8
LP-Sxxx
LP-S series
LP-Sxxx-CHN
LP-Sxxx-SF
LP-Sxxx-LS1
LP-SxxxW
LP-SxxxW-CHN
11

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents