Installation Direction - Panasonic LP-S Series Maintenance Manual

2-3-3 Installation direction

For making use of laser marker safely and fully, install the laser marker to either direction shown below.
„ Head
The head can be installed to all directions (up, down, left, and right).
WARNING
• Do not incorporate the laser marker in a unit where the laser head will be moved. It may cause failure.
• If the head unit is installed with the lens side up, clean the lens surface regularly not to be covered with the marking dust.
„ Controller
The controller can be installed to the following directions.
• Install the product so that the laser beam path does not cross the eye height.
• The laser beam path shall be enclosed with protective enclosure and make
sure it is not exposed with direct light or reflected light.
ME-LPS-SSM-8
55