Panasonic LP-S Series Maintenance Manual page 98

Terminal No. Name / Description
20 to 22 SELECT 0, SELECT 1, SELECT 2: select 0 to 2 input
Select the corresponding number input from D0 to D15 and the guide laser radiation details.
• Select the number input target
Input SELECT 0 to 2 corresponding to the number input shown below. Turn the number input and set
input ON while maintaining the SELECT 0 to 2 input status.
File No.
Count-up value correction
Count-down value correction
Counter number to reset
Data number for rank/external offset
• Select guide laser radiation details
Input SELECT 0 to 2 corresponding to the guide laser radiation details as shown below. Turn the guide
laser radiation input to ON while maintaining the SELECT 0 to 2 input status.
Dual pointer
Guide laser (Marking character string)
Guide laser (Marking field)
Work image
23 TIME HOLD: Time hold input
While this input is turned on, the laser marker retains the time and date of the internal clock at the point
when the input was turned ON, then it marks the functional characters such as date, expiry, and lot.
If the time hold input is turned ON when powering on the laser marker, it retains the system startup time.
24, 25 RESERVE: System reservation
Do not connect externally.
26 GUIDE: Guide Laser Input
The guide laser irradiates while this input is turned ON. (Up to one minute)
Determine the guide laser radiation details by the combination of SELECT 0 to 2 input (No. 20 to No. 22).
This terminal will be turned ON only during the guide laser radiation thereafter.
Input this terminal with the shutter closed.
27 to 29 RESERVE: System reservation
Do not connect externally.
98
Number input target
Radiation details
ME-LPS-SSM-8
SELECT 0 SELECT 1
OFF OFF
OFF ON
ON ON
OFF OFF
ON OFF
SELECT 0 SELECT 1
OFF OFF
ON OFF
OFF ON
ON ON
SELECT 2
OFF
OFF
OFF
ON
OFF
SELECT 2
OFF
OFF
OFF
OFF