Panasonic LP-S Series Maintenance Manual page 68

Procedure for Fiber Unit Detaching
1.
Use a hexagon wrench to loose the 4 locking screws on the fiber unit. Handhold the fiber unit and
remove it from the head.
LP-Sxxx(-SF/-CHN/-LS1) type
LP-SxxxW(-CHN) type
• Do not remove the screws other than the specified ones. It may cause failure.
• Not to break the screw head, use the end-rounded tightening tool and insert it to the screw head as straight as possible.
2.
Attach the protection cap to the fiber unit.
The protection cap for the fiber unit is supplied with the laser marker.
LP-Sxxx(-SF/-CHN/-LS1) type
Protection cap for the fiber unit
• Attach the protection cap always when the fiber unit is detached from the laser marker.
68
LP-SxxxW(-CHN) type
ME-LPS-SSM-8
Protection cap for the fiber unit