Dip Switch - Panasonic LP-S Series Maintenance Manual

2-2-3 DIP switch

Set the operational options of the laser marker with the DIP switch
equipped on the controller rear side.
• A plastic cover is installed on the DIP switch. Install this cover always
to avoid the dust penetration to the controller.
• The initial setting of all DIP switches is OFF.
• Turn OFF the power at DIP switch setting.
Item
No. 1
No. 2
No. 3
No. 4
50
Description
System reservation. Keep OFF state.
Select the control method, I/O or command for some specific operations.
ON Control by serial communication commands for the following operations
• Laser pumping (LSR)
• Shutter control (SHT)
• Guide laser (GID)
• Laser check radiation (SPT)
• Laser power measurement (PWM)
• Power check (PWR)
• Test marking (TST)
OFF Control by I/O for the following operations
• Laser pumping
• Shutter control
• Guide laser radiation
Select the ON/OFF of the buzzer sound to notify the alarm or warning occurrence.
ON Disables the buzzer sound for alarm or warning state.
OFF Enables the buzzer sound for alarm or warning state.
Select the ON/OFF of the password lock to allow the settings of the screen. Refer to
"Operation manual" for the password settings.
ON Disables the password lock.
OFF Enables the password lock.
ME-LPS-SSM-8
ON
OFF
DIP switch
Rear of controller