Table of Contents
Advertisement
Chapter 1 GENERAL DESCRIPTION
4-1-2
Turn Over Unit, Contents of Switch Lamp
NO.
operation button lamp switch color
AUTO
1
MANU.
PASS
EMERGENCY
2
RESET
3
UPPER CONV.
4
UNDER CONV.
5
ROTATE
6
REVERSE
7
Page 4-2
manual : a button to do the manual operation by the
rotary
auto
-
black
SW
pass
a button to do the emergency stop
At the return, turn right the switch and push the reset
-
red
button.
manual : a button to return to the starting point of the
180 degree inversion unit and to reset the error
-
yellow
auto
manual : a button to turn the top conveyer (under at the
-
white
manual : a button to turn the under conveyer (top at the
-
white
manual : a button to reverse the reverse unit from the
-
white
manual : a button to return the reverse unit to the
-
white
* 1 On using the machine of manual-change board
stopper type at the pass position, remove the
board stopper.
As for the machine of air cylinder stopper type,
selecting pass mode automatically releases the
board stopper.
Section 4 BASIC OPERATION
function expression
each button
: a button to do the auto operation by the line
signal
: a button to do the board carry not to do the
inversion movement *1
: a button to reset the error
inversion)
inversion)
previous position
previous position
6Q4C-E-OMA04-A01-02
Advertisement
Table of Contents
