M306NKT3-RPD-E User's Manual
(3) Executing up to the cursor position (Come command)
1) Specifying the Come command
2) After the Come command has finished
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006
3. Usage (How to Use the Emulator Debugger)
Setup procedure for executing COME command
(1) Click the line in the editor (source) window at which you
want the program to execute.
(2)
Click the Come button.
The cursor stops in the position where the come command was
executed.
The statement specified with the come command is not executed.
Page 62 of 104