Renesas Single-Chip Microcomputer M306NKT3 User Manual page 63

M306NKT3-RPD-E User's Manual
(2) Software break
1) Setting the software break point
2) Execution completed with software break
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006
3. Usage (How to Use the Emulator Debugger)
Execution setup procedure with software break:
By double-clicking the break point setting line on the software
(1)
break point setting column in the editor (source) window, the
break point can be set up and released. (In this case, the red
circle is displayed on the setting line as shown in the window on
the left.)
(2) Click the execution button.
The cursor stops in the position where the software break was set up.
The statement in which the software break was set up is not
executed.
Page 61 of 104