M306NKT3-RPD-E User's Manual
(3) When DATA ACCESS is selected
1) Window for setting the address
2) Window for setting data
REJ10J0326-0400 Rev.4.00 Sep. 01, 2006
3. Usage (How to Use the Emulator Debugger)
Setting the address
Sets the address by "Address" tab.
You can set eight conditions, e.g., a specified address, a specified address
range, etc.
Setting data
Sets the address by "Data" tab.
You can set eight conditions, e.g., specified data, specified data range, etc.
Setting the access condition
You can set three conditions, e.g., read, write, and read/write. When you
have finished setting the data and access condition, click OK.
Page 65 of 104