Table of Contents
Advertisement
RL78/G22 Fast Prototyping Board
1. Overview
This user's manual describes the RL78/G22 Fast Prototyping Board (RTK7RLG220C00000BJ) (hereinafter
referred to as "this product").
1.1
Purpose
This product is an evaluation tool for a Renesas MCU. This user's manual describes the hardware
specifications, ways of setting switches, and the basic setup procedure.
1.2
Features
This product can handle the following tasks.
Programming of the Renesas MCU
•
Debugging of user code
•
User circuits for switches and LEDs
•
Capacitive touch button x 2
•
Capacitive touch slider (with a three-electrode configuration) x 1
•
Pmod connector*
•
Arduino
connector*
•
Grove connector*
•
Note: We do not guarantee connection to all types of these connectors. For details on the connector
specifications, refer to the descriptions in this document.
1.3
Preparation
Watch the video on "Getting Started with Fast Prototyping Board for RL78 Family".
•
https://www.renesas.com/video/getting-started-fast-prototyping-board-rl78-family
Install the integrated development environment (IDE) and required software on the host PC.
•
https://www.renesas.com/development-tools
Prepare a micro-USB cable for data transfer.
•
Refer to the following Web page and prepare the E2 emulator if required.
•
https://www.renesas.com/e2
Refer to the following Web page and prepare the E2 emulator Lite if required.
•
https://www.renesas.com/e2lite
R20UT5121EJ0100 Rev. 1.00
Nov.16.22
1. Overview
Page 1 of 35
Advertisement
Table of Contents
