Use Your Product; Led Configuration - RGBlink GX4 Quick Start Manual

USE YOUR PRODUCT

LED Configuration

GX4 is built in Subito Sender which can control LED screen with RBGLink receivers.
Here is the led configuration sub-menu.
1. QUICK CONNECT
1.1 SEND CARD SET
X,Y : the horizontal and vertical position of the
display that the Sender card control the
on LED scressn
One port of Subito Sender can control
650K pixels. If a LED screen is under 650K pixels
X,Y can be 0.
X maximum 1920
Y maximum 1080
SAVE SENDER CARD: save the X,Y setting to sender card.
RESET SEND CARD: reset sender card if parameters set above is not proper.
1.2 RECEIVE CARD SET
CHOOSE CABLE:choose the output LAN port on the
Sender. There are 4 ports available.
HORIZONTAL CARD: how many receive cards needed
to receive the data that the chosen sender
port offer
WIDTH: width of each led cabinet
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
>X
SAVE SENDER CARD
RESET SENDCARD
support@rgblink.com
>QUICK CONNECT >>
ADVANCED >>
>SEND CARD SET >>
RECEIVE CARD SET >>
RESET ALL CARD
Y
>CHOOSE CABLE 4
HORIZONTAL CARD 0
VERTICAL CARD 0
WIDTH 64
HEIGHT 64
| www.rgblink.com
7 / 32