RGBlink GX4 Quick Start Manual page 12

Note: The number buttons lighting up indicate that users can use button to key in numbers.
3. OUTPUT ADJUST
DVI MODE: DIV or HDMI
BITS: DVI 8bit
HDMI 8/10/12 bit
COLOR SPACE: IMAGE or VIDEO
DE ADJUST:
DE: ON or OFF
H POS: horizontal position, value from 0 to 1920
V POS: vertical position, value form 0 to 1080
H POLARITY:horizontal polarity, POS (positive) or
NEG (negative)
V POLARITY:vertical polarity,
POS (positive) or NEG (negative)
RESET: reset above setting if not proper
4. SCREEN
The setting of <SCREEN> is based on the resolution of the LED screen,applicable under single picture mode. For
example to display picture on a LED screen with resolution 1408x832, first of all, a resolution close to or bigger
than 1408x832 shall be selected. In this case, 1440x900 or resolution above will be proper choice. The closer to
the LED screen resolution, the better the display will be.
H SIZE:horizontal pixels, turn the knob or use the digital button to input 1408.
V SIZE:vertical pixels, turn the knob or use the digital button to input 832.
H POS:horizontal position, default 0, set the value as the way of H SIZE and V SIZE.
V POS:vertical position, default 0, set the value as the way of H SIZE and V SIZE.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
Customize:
*1450x900@00
>DE
H POS
V POS
H SIZE
V SIZE
H POLARITY
V POLARITY
H POS
V POS
H SIZE
V SIZE
MODE FULL SIZE
support@rgblink.com
Customize:
*1450x900@60
DVI MODE DVI
BITS 8 BIT
COLOR SPACE IMAGE
DE ADJUST >>
RESET
OFF
185
41
1920
1080
POS
POS
RESET
185
41
1920
1080
| www.rgblink.com
11 / 32