Input - RGBlink GX4 Quick Start Manual

Input

1. INPUT INFO
Show the current input format
and resolution
2. SIZE ADJUST
H SIZE:set the horizontal pixels of input image to zoom or scale the input signal
V SIZE:Set the vertical pixels of input image to zoom or scale the input signal
H POS:set the horizontal position of image
V POS:set the horizontal position of image；
RESET SIZE:if the size is not proper, turn knob to RESET SIZE and press 【OK】
MASK TOP:crop the top of image
MASK BOTTOM:crop the bottom of image
MASK LEFT:crop the left part of image
MASK RIGHT:crop the right part of image
RESET MASK:If the crop not proper, turn knob to RESET MASK and press【OK】.
3. VGA ADJUST
Non-standard VGA input signal can cause the input image shifting or not in full screen, therefore, users need to
ajust VGA input as follows:
After selecting <AUTO AJUST> the device will automatically adjust the H POS,V POS, CLOCK and PHASE to make
input image no shifting and full screen.
Note:If one <AUTO AJUST> cannot meet the needs, users can do <AUTO AJUST> many times. The system can
automatically save the ADJUST parameter. Users can also go to <AUTO AJUST> by pressing 【VGA】button for
10s.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
INPUT INFO
SIZING ADJUST
USB CONTROL
VGA ADJUST
ADC AJUST
H SIZE
V SIZE
H POS
V POS
RESET SIZE
MASK TOP
MASK BOTTOM
MASK LEFT
MASK RIGHT
RESET MASK
support@rgblink.com
SDI ADJUST
>>
EDID MANAGE
>>
VGA TYPE
>>
>>
>>
1024
768
0
0
>>
>>
>>
>>
H POS
V POS
CLOCK
PHASE
>AUTO ADJUST
| www.rgblink.com
0
0
0
0
15 / 32