Freeze】Button; Bri】Button - RGBlink GX4 Quick Start Manual

【FREEZE】Button
To freeze current output image, users can press 【FREEZE】on the front panel.
LCD shows "FROZEN" in the state bar and the 【FREEZE】button light is on.
To exit FREEZE mode, press 【FREEZE】again and the button light goes out.
【BRI】Button
Push【BRI】button
saturation,sharpness, color temperature of red, green and blue.
BRIGHTNESS:range from 0 to 100.
CONTRAST:range from 0 to 100.
SATURATION:range from 0 to 100
SHAPRNESS:range from 38 to 62
RED:range from 0 to 100
GREEN:range from 0 to 100
BLUE:range from 0 to 100
RESET:If image quality distorts by improper operation, it can be recover by reset
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
and enter the image adjustment menu where users can adjust brightness, constrast,
*BRIGHTNESS
CONTRAST
SATRUATION
SHARPNESS
RED
GREEN
BLUE
RESET
support@rgblink.com
50
55
50
50
50
50
50
| www.rgblink.com
25 / 32