Installation Guide Linear Rotary Motors
7.2 Sensor Cable
Ordering informationen
Item
KSS02-08-./M12A8-10
7.3 Shaft-Hub Clamping
Since both rotary and linear movements are carried out with linear motors, a type of shaft load attachment
must be selected which can absorb both torques and forces in the longitudinal direction. A friction-locked
connection is created with the aid of a shaft-hub clamping.
Ordering information
Item
RS02-SS25x47
NTI AG / LinMot
Description
Sensor Cable for PR02, 10m, open cable end
Item
Shaft-hub clamping for 25mm shaft
PR02-88
ENG
Item-No.
0150-2959
Item
0230-0516
Page 25 / 34