Table of Contents
Advertisement
Installation Guide Linear Rotary Motors
ENG
To do this, click on the Motor Wizard symbol in the task bar of the LinMot-Talk software.
Then follow the sequence of steps from chapter 6.7.2.
6.6 Setting Motor Parameters
The various parameters for the linear motor and the rotary motor are set via the corresponding motor wizard
in the LinMot Talk configuration program. To open the wizard, select the "Motor Wizard" icon in the task bar.
6.6.1 Selection of the Motor Data Files
If the connected motor is a module with plug and play functionality, the following step can be skipped.
If no "PnP" symbol is printed on the motor nameplate, the module and motor-specific parameters must be
loaded manually via the Motor Wizard. So-called motor data files are available for this purpose. The motor
data file corresponding to the module (*.adf or *.adp) must be selected in the first step of the Motor Wizard.
The linear rotary motors are located in the installation directory of the LinMot-Talk software (download at
www.linmot.com) in the folder "Motors\LinMot Linear Rotary Motors\...".
Please contact support if the motor data files are not available.
If the motor data files are not available, they can be downloaded using the function "Search for new motor
files". The function is stored in the LinMot-Talk software under "Help\Update functions".
6.6.2 Application-specific Parameters
Application-specific parameters, such as cable length, load mass, PID control settings, etc. can be entered
by the user using the Motor Wizard. The Motor Wizard must be started for this purpose. Once the Motor
Datafile has been selected (according to the previous chapter), the Motor Wizard guides you through the
menu step by step.
Application parameters should be entered as accurately as possible to ensure the best possible motor
control.
Page 18 / 34
PR02-88
NTI AG / LinMot
Advertisement
Table of Contents
