Toggle Switch For Two-Wheel Drive Or Four- Wheel Drive(With Differential) - Segway SNARLER AT6 S Owner's Manual

VEHICLE DEVICE VEHICLE DEVICE
Toggle switch for Two-wheel drive or Four-
wheel drive(With differential)
Key Key Instrument Instrument
operation operation lcon lcon
Blue button Blue button
pressed， ，
pressed
Red button Red button
pops up pops up
Blue button Blue button
pressed， ，
pressed
Red button Red button
pressed pressed
Mode Mode
Real axle differential
When the two-four-wheel drive switch is in the
two-wheel drive state, the whole vehicle is only
2 x 4
driven by the rear wheel, and the front wheel has
patterns
no power output. The meter shows the symbol "
" for the second drive. This mode is suitable
for vehicles driving on flat roads.
When the two-four-wheel drive switch (4-wheel
drive switch) is pressed, the symbol "
4-wheel drive is displayed on the instrument. At
4 x 4
this time, the instrument is in the state of 4-wheel
patterns
drive, with power output of the front wheel and
power output of the rear wheel. This mode is
suitable for muddy conditions, mountainous
conditions and other bad road conditions.
46
Definition of mode state Definition of mode state
" of