Segway SNARLER AT6 S Owner's Manual page 87

Hide thumbs Also See for SNARLER AT6 S:
Table of Contents

Advertisement

Major engine damage can result if the vehicle is not thoroughly
inspected after operation in water. Perform the services outlined in
the Periodic Maintenance Chart. The following areas need special
attention: engine oil, transmission oil, demand drive fluid and all
grease fittings. If the vehicle tips or overturns in water, or if the
engine stops during or after operating in water, service is required
before starting the engine. Your dealer can provide this service. If it's
impossible to bring the vehicle in before starting the engine, perform
the service outlined in the Vehicle Immersion section of this manual,
and take the vehicle in for service at the first opportunity.
1.
Determine water depths and current before entering water.
2.
Choose a crossing where both banks have gradual inclines.
3.
Avoid operating through deep or fast-flowing water.
4. After leaving water, test the brakes. Apply them lightly several
times while driving slowly. The friction will help dry out the
pads. If it's unavoidable to enter water deeper than the
footrest level:
CAUTION
!
79
OPERATION
OPERATION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Snarler at6 l

Table of Contents