Vehicle Device; Operation; Vehicle Activation - Segway SNARLER AT6 S Owner's Manual

VEHICLE ACTIVATION

This vehicle is equipped with vehicle DTS system for you. DTS is
used to communicate with background system and mobile APP,
so as to obtain vehicle information and control vehicle with mobile
APP. This is an optional system. In order to make you quickly
familiar with and use the system, please read the user's manual
carefully, understand the relevant operation and use information.
The new vehicle must be activated on the APP for the first time if
equipped with vehicle DTS, otherwise the engine will not start.
IOS mobile phone search "Segway powersports" to download
application from "APP STORE" ，Android mobile phone first
download "Google play", and then search "Segway powersports"
to download application in Google Play.
After the successful installation of the APP, the vehicle will be
registered and activated. Firstly, find the VIN code on the vehicle
and register on the APP. The registration procedure is as follows:
1. Power on the vehicle with the mechanical key;
Input or scan vehicle VIN code according to APP registration
prompts, and step on the vehicle brake at the same time. The
VIN barcode is located under the seat cushion. Note: The vehicle
identification code may not be scanned due to the influence of
light. You can try to enter the VIN code manually. The vehicle VIN
code is either on the vehicle frame (see Page 171) or on the vehicle
nameplate (see Page 172).
2. Click the confirm button to complete the vehicle binding

operation.

3. Click to start the vehicle.

VEHICLE DEVICE

VEHICLE DEVICE
NOTICE
35