I Cancel The Alarm Action; I Suspend The Alarm Actions - Panasonic WJ-HD309A Operating Instructions Manual

I Cancel the Alarm Action

When an alarm has occurred, this unit will start the alarm
action according to the selected alarm action mode.
To cancel the alarm action, press the ALARM RESET but-
ton.
When "ON" is selected for "Alarm Auto Reset" (on the "Alarm
Setup" menu of "Event"), the following will be performed
automatically even if the alarm action is not canceled by
pressing the ALARM RESET button on the front panel.
• The ALARM indicator will stop blinking and light steadi-
ly
• The displayed alarm information will disappear
• The buzzer will stop beeping
TIMER
ERROR
ALARM
ALARM
SUSPEND ALARM
RESET
HDD 1
OPERATE
HDD 2
z
z
Press the ALARM RESET button to cancel the
alarm actions.
The ALARM indicator will go off.
Note: When the alarm is canceled, the event action will
stop.
STOP
MONITOR1
MONITOR2
1 2 3 4
PAN/ GOTO
TILT LAST
SHIFT SEQ OSD
5 6 7 8
ZOOM/ A-B
FOCUS REPEAT
DISK SELECT COPY TEXT MARK
9 10/0 11 12
IRIS LISTED
PRESET
EL-ZOOM LOGOUT
/AUTO
13 14 15 16

I Suspend the Alarm Actions

It is possible to suspend (deactivate temporarily) the alarm
actions even when an event has occurred.
This function will be useful when it is necessary not to acti-
vate the alarm actions for a certain period, such as when
configuring the system. However, images and event logs
will be recorded even when alarm actions are suspended.
MONITOR1
MONITOR2
TIMER
ERROR
M
SHIFT
ALARM
D
RESET
DISK SELECT
HDD 1
E
EL-ZOOM
HDD 2
zx
PLAY
SEA
PAN/TILT
SLOW
G To suspend (deactivate temporarily)
the alarm actions
BUSY
z
Press both the ALARM RESET button and the
SET button at the same time.
The ALARM SUSPEND indicator will light.
G To stop suspending the alarm
actions
x
Press both the ALARM RESET button and the
SET button at the same time again.
The ALARM SUSPEND indicator will go off.
Note: When an external switch is connected to the
ALARM/CONTROL connector on the rear panel, it is
possible to suspend the alarm actions using the exter-
nal switch.
In this case, the alarm actions will be suspended when
the external switch is on.
To stop suspending the alarm actions, set the external
switch to off.
STOP PLAY
1 2 3 4
PAN/ GOTO
SEARCH
TILT LAST
SEQ OSD
PAN/TILT
5 6 7 8
SLOW
ZOOM/ A-B
FOCUS REPEAT
COPY TEXT MARK
9 10/0 11 12 IRIS LISTED
PRESET
LOGOUT LOGOUT
/AUTO
13 14 15 16
BUSY
PAUSE REC - REC STOP
REV FW
SETUP
/ESC
–
SET
zx
51