Panasonic WJ-HD309A Operating Instructions Manual page 67

Notes:
• When a user is operating this unit using a PS·Data compatible controller, this user can log in automatically as a PSD user
set for "PSD User" of "System" on the SETUP MENU.
• When a user logged into this unit using a PS·Data compatible controller and didn't operate the unit for around 2 minutes,
this PSD user will be forced to log out.
• It is possible to log in as the user who has already logged in regardless of priority.
G When the unit is operated using a PC via a network
Operate using a PC via a network. Up to 8 hosts (PCs) can access the unit.
When a host tries to log in after 8 hosts have already logged in the unit, the unit will work as follows according to the setting for
"Priority" of "System".
Setting for "Priority"
Follow the priority
Pre-priority
Post-priority
When accessing the unit using a PC via a network, the unit will work as follows according to the setting for "User
Authentication" and "Host Authentication" of "NW Setup 1".
Setting for "User
Authentication"
OFF
ON
OFF
ON
Setting for "Host
Authentication"
OFF
OFF
ON
ON
Description
When a host's priority is higher than the one of the other host
who has already logged in, this host can log in and the other
host who has already logged in will be forced to log out.
When a host's priority is lower than the one of the other host
who has already logged in, this host cannot log in.
Any host cannot log in regardless of priority. However, it is
possible to log in as an administrator by operating the but-
tons on the front panel of the unit. In this case, users who
have already logged in will be forced to log out.
Any host can log in regardless of priority.
User/Host to log in
Log into the unit as an admin-
istrator.
Log into the unit as a regis-
tered user.
Log into the unit as a regis-
tered host.
Log into the unit as a regis-
tered user.
Note
The login window will be dis-
played.
The login window will not be
displayed.
It is impossible to log in for
an unregistered host.
67