Panasonic WJ-HD309A Operating Instructions Manual page 39

MONITOR1
MONITOR2
R
1 2 3 4
PAN/
R
TILT
SHIFT SEQ OSD
5 6 7 8
ZOOM/
FOCUS
DISK SELECT COPY TEXT MARK
9 10/0 12 IRIS
11
1
PRESET
EL-ZOOM LOGOUT LOGOUT
/AUTO
13 14 15 16
2
⁄3
Move the cursor to select a detection mode
using the arrow buttons and rotate the jog dial
to check the radio button next to the selected
detection mode. Press the SET button to deter-
mine the selection.
I VMD SEARCH
ANY AREA
MASKING DURATION
VECTOR
A 20s B 20s
DURATION
A 20s B 20s
SET : [SETUP/ESC]
Refer to page 40 for further information about each of the
detection modes.
<ANY AREA mode>
Move the cursor to the parameter box using the arrows but-
ton (C) to select a masking duration from the following.
1 s/1 min/1 h/24 h
<VECTOR mode>
Move the cursor to an area for the settings of VECTOR
using the arrows button (C) and rotate the jog dial to select
an area. Move the cursor to the parameter box of the
selected area using the arrows button (B) to select an
interval time for an object moving between each area from
the following.
–/5 s/10 s/20 s/30 s/40 s/50 s/1 min
<DURATION mode>
Move the cursor to the parameter box of each area using
the arrows button (B) and rotate the jog dial to select a
moving duration for an object in each area from the follow-
ing.
0 s/5 s/10 s/20 s/30 s/40 s/50 s/1 min
⁄4
After setting the detection mode, press the
SETUP/ESC button.
⁄8 ⁄5 ⁄ 7 ⁄4
STOP PLAY PAUSE REC - REC STOP
REV FWD
GOTO
LAST SEARCH
SETUP
PAN/TILT
SLOW /ESC
A-B
REPEAT
–
LISTED
SET
BUSY
⁄3 ⁄3 ⁄ 5 ⁄3 ⁄6
24h
C 20s D
C 20s D 20s
SEARCH : [PLAY]
⁄5
After selecting "EXIT" by rotating the jog dial,
press the SET button or the PLAY/PAUSE but-
ton to start searching and display the results
of the VMD search.
+
316
Notes:
• Up to 200 results will be displayed. (When 200 results
are listed, searching will stop.)
• It may take some time until the search results are dis-
played.
• It is possible to stop searching by pressing the STOP
button.
⁄6
Rotate the jog dial to select a result to be dis-
played.
VMD SEARCH
TIME&DATE
AUG.20.04 3:07:28 PM
AUG.20.04 3:07:27 PM
AUG.20.04 3:07:26 PM
AUG.20.04 3:07:24 PM
AUG.20.04 3:07:22 PM
AUG.20.04 3:07:21 PM
AUG.20.04 3:07:20 PM
AUG.20.04 3:07:19 PM
AUG.20.04 3:07:28 AM
TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK
It is possible to turn the page by rotating the shuttle ring.
⁄7
Press the PLAY/PAUSE button to start play-
back.
The LISTED indicator and the indicator on the PLAY/PAUSE
button will light and playback of the selected recording will
start.
Note: It is possible to skip from the playback point to the
listed time (motion detected time) by rotating the jog
dial when the LISTED indicator is lit.
To return to normal playback, press the LISTED button.
⁄8
Press the STOP button to stop playback.
The indicator on the PLAY/PAUSE button will go off and
playback will be stopped.
Live images will be displayed on monitor 2 and the VGA
monitor.
CAM
01ch
01ch
01ch
01ch
01ch
01ch
01ch
01ch
AUG.20.04 3:00:00 AM TOTAL 200
39