Panasonic WJ-HD309A Operating Instructions Manual page 53

MONITOR1
MONITOR2
R 1 2 3 4
PAN/
R
TILT
SHIFT SEQ OSD
5 6 7 8
ZOOM/
FOCUS
DISK SELECT COPY TEXT MARK
10/0
9 11 12 IRIS
1
PRESET
LOGOUT LOGOUT
EL-ZOOM
/AUTO
13 14 15 16
2
c
Perform the settings for data copy (camera
channel, time range, the disk on which images
are to be copied). Move the cursor to each set-
ting item using the arrows button and select a
parameter by rotating the jog dial. (It is possi-
ble to change only the CAMERA parameter set-
tings by pressing the SET button.)
Notes:
• Time range to be set for "PERIOD" should be 99 min-
utes and 59 seconds or less to copy images for one
attempt. (Copying will stop automatically when the size
of the copied data reaches 4 GB even before the end
time of the set time range.)
• When "COPY 1" or "COPY 2" is selected for "COPY
DRIVE", it is possible to detect alteration using the view-
er software by checking the "ALTER DETECT" check-
box.
v
Select the "OK" button using the arrows button
and press the SET button.
The DATA COPY window will be closed and data copy will
start.
The copy icon will be displayed on the task bar during
copying.
To close the DATA COPY window, select "CANCEL" using
the arrows button and press the SET button. The setting will
be canceled and the DATA COPY window will be closed.
Copy icon
In the following cases, copying will not start even when you
move the cursor to "OK" and press the SET button:
• When another user has selected the desired copy drive
• When copying is being performed manually
Important:
• To eject the disk, do the following operation (copy com-
pletion) while live images are displayed before pressing
the eject button of the external recording device.
STOP PLAY PAUSE REC - REC STOP
REV FWD
GOTO
SEARCH
LAST
SETUP
PAN/TILT
SLOW /ESC
A-B
REPEAT
–
LISTED
SET
BUSY
cvcv v
<To eject the disk of COPY1>
Confirm the SHIFT indicator is lit. Then, press the COPY
button and [1] simultaneously for 2 seconds or more.
<To eject the disk of COPY2>
+
Confirm the SHIFT indicator is lit. Then, press the COPY
button and [2] simultaneously for 2 seconds or more.
316
• Copying will be performed in the following order:
Viewer Software → Images → Audio
Depending on the set time range for "PERIOD", some of
images and audio may not be copied.
• Use the viewer software to play the copied images.
Refer to the Network Operating Instructions (PDF) for
descriptions of how to play the copied images.
53