Panasonic WJ-HD309A Operating Instructions Manual page 61

Indication
THERMAL Warning
POWER Warning
#-nn% (available Error
disk space is run-
ning out)
#-FULL (no avail- Warning
able disk space)
MEDIUM-n Warning
REMOVE Error
FAN Warning
HDD-ERROR Error
Status
Thermal error of the unit or the optional
extension unit has been detected.
The power outage alert signal is sup-
plied from the uninterruptible power sup-
ply system (UPS). Internal processing
will start when the set time for "Shutdown
Time" on the "Basic Setup" menu of
"System" has passed after having
received the power outage alert signal.
(Refer to page 106.) When the internal
processing starts, recording will stop
and all operations will be invalid.
The hard disk is almost full or completely
full.
The DVD-RAM disk is almost full or com-
pletely full.
The CD-R or DVD-R disk is almost full or
completely full.
The external recording device is not
operable because no disk or different
format disk has been inserted, etc.
An error has occurred on the hard disk
and the hard disk has been unmounted
from the system automatically.
The fan of this unit or the optional exten-
sion unit is malfunctioning. It may pro-
duce an increase in temperature in the
unit and cause malfunction of the HDDs.
The designated hard disk drive was not
found because of a hard disk drive
error, etc.
Description Solution
Press the ALARM RESET button to can-
cel the warning status. The unit will be in
the error half-reset/error reset condition.
If thermal errors occur frequently, the
unit may be malfunctioning. Contact the
dealer.
Press the ALARM RESET button to can-
cel the warning status. The unit will be in
the error half-reset/error reset condition.
The unit will start operation automatically
after the UPS starts power supply.
Press the ALARM RESET button to can-
cel the error/warning status. The unit will
be in the error half-reset/error reset con-
dition. Initialize or replace the hard disk.
(Refer to pages 145, 140.) When initial-
ized, all recorded data will be deleted. It
is recommended to copy the data using
an external recording device.
Press the ALARM RESET button to can-
cel the error/warning status. The unit will
be in the error half-reset/error reset con-
dition. Initialize the DVD-RAM disk.
(Refer to page 56.) When initialized, all
recorded data will be deleted.
Press the ALARM RESET button to can-
cel the error/warning status. The unit will
be in the error half-reset/error reset con-
dition. Replace the disk with a new one.
Press the ALARM RESET button to can-
cel the warning status. The unit will be in
the error half-reset/error reset condition.
Confirm that a disk has been inserted, or
check the inserted disk format.
Consult the dealer. After replacing the
hard disk, the "REMOVE" error status will
be canceled.
Press the ALARM RESET button to can-
cel the warning status. The unit will be in
the error half-reset condition. Consult the
dealer.
Press the ALARM RESET button to can-
cel the error status. The unit will be in
the error half-reset condition. Contact
the dealer.
61