Control Cameras; I Panning/Tilting; I Zoom; I Focus - Panasonic WJ-HD309A Operating Instructions Manual

CONTROL CAMERAS

When displaying live images, the following camera controls
are possible.
• Panning/Tilting: Moves a camera horizontally/vertically.
• Zooming: Zooms in/out on images.
• Focus: Adjusts the focus.
• Iris: Adjusts the iris of the lens.
• Preset Action: Moves a camera to the preset position
registered in advance.
• Auto Function: Moves a camera with an auto function
set in advance.
Notes:
• Controlling cameras is possible only when displaying
images on a single screen.
• Depending on models of the connected cameras, it
may be impossible to control the camera or some func-
tions may not be available.
• When a user with higher priority is controlling the select-
ed camera, it may be impossible to control the camera.
Refer to page 66 for further information about priority.
• Refer to page 139 for descriptions of how to display
and perform the settings with the settings menu of the
camera from this unit.

I Panning/Tilting

Moves a camera horizontally/vertically.
MONITOR1
MONITOR2
R
1 2 3 4
PAN/
R
TILT
SHIFT SEQ OSD
5 6 7 8
ZOOM/
FOCUS
DISK SELECT COPY TEXT MARK
9 10/0 11 12 IRIS
PRESET
EL-ZOOM LOGOUT LOGOUT
/AUTO
2 13 14 15 16
c
z
Press the PAN/TILT button.
The PAN/TILT indicator will light.
x
Use the arrows button to adjust the vertical or
horizontal position.
Camera will move slowly by pressing the arrows button
while holding the PAN/TILT SLOW button down.
c
Press the camera selection button ([1] - [16] for
the WJ-HD316A, [1] - [9] for the WJ-HD309A)
respective to the controlled camera channel to
quit the panning/tilting operation.
STOP PLAY PAUSE REC - REC STOP
REV FWD
GOTO
LAST SEARCH
PAN/TILT SETUP
/ESC
SLOW
A-B
REPEAT
–
LISTED
SET
BUSY
z x x
I Zooming
Zooms in/out on images. Depending on models of the con-
nected cameras, the image size for the respective zooming
level may be different. For further information, refer to the
operating instruction for the camera.
MONITOR1
MONITOR2
R
1 2
R
SHIFT SEQ
5 6
DISK SELECT COPY TEXT
9 10/0
1
EL-ZOOM LOGOUT
13 14
2
c
z
Press the ZOOM/FOCUS button.
The ZOOM/FOCUS indicator will light.
x
Use the arrows button (CD) to zoom in on or
out of the displayed image.
Press the arrows button downward (C) to zoom out and
upward (D) to zoom in.
c
Press the camera selection button ([1] - [16] for
the WJ-HD316A, [1] - [9] for the WJ-HD309A)
respective to the controlled camera channel to
quit the zooming operation.
+
316

I Focus

Adjusts the focus. The auto focus function is available.
MONITOR1
MONITOR2
R
1 2
R
SHIFT SEQ
5 6
DISK SELECT COPY TEXT
9 10/0
1
EL-ZOOM LOGOUT
13 14
2
c
z
Press the FOCUS button.
The ZOOM/FOCUS indicator will light.
STOP PLAY PAUSE REC - REC STOP
3 4
PAN/ GOTO
TILT LAST SEARCH
OSD
SETUP
PAN/TILT
7 8 SLOW /ESC
ZOOM/
A-B
FOCUS
REPEAT
–
MARK
12 IRIS
11 LISTED
PRESET
LOGOUT
/AUTO
15 16
SET
BUSY
z x
STOP PLAY PAUSE REC - REC STOP
3 4
PAN/ GOTO
TILT LAST SEARCH
OSD
SETUP
PAN/TILT
7 8 SLOW /ESC
ZOOM/
A-B
FOCUS
REPEAT
–
MARK
12 IRIS
11 LISTED
PRESET
LOGOUT
/AUTO
15 16
SET
BUSY
z x x
REV FWD
+
316
REV FWD
+
316
45