Connections - Panasonic WJ-HD309A Operating Instructions Manual

CONNECTIONS

Important:
• Use only the recommended BNC connectors listed below.
Standards
For U.S.A.
For Europe
For Japan
Suffixes attached to the standards may be updated.
Other BNC connectors may cause video signal interruption, and damage the BNC receptacles on the rear panel of the
unit.
• When connecting the Panasonic matrix switcher or the data multiplex unit to this unit, the looped through output signal for
every video input signal from them must be supplied to the video input connectors of this unit directly.
Do not supply the monitor output signal or the spot output signal from the matrix switcher or the data multiplex unit to the
video input connectors of this unit.
Otherwise, the images may be disorderly displayed and recorded for a split second. (The images displayed before switch-
ing channel may be displayed and recorded.)
72
RECOMMENDED
Tip dimensioins inside the BNC
Ø 1.32 mm – Ø 1.37 mm
Ø 0.13 mm – Ø 0.69 mm
MIL-C39012C or MIL-C39012/16F
BS CECC 22120:1981
JIS C5412
BNC
Tip
(inside)
Video (coaxial) Cable