Notification By E-Mail; Alarm Mail Notification - Panasonic WJ-HD309A Network Set Instructions

Notification by e-mail

Alarm mail notification

The following mail will be sent to notify of an alarm occurrence to a registered address when an alarm occurs.
In HD316A (192.168.0.250), alarm was occurred.
Alarm date: xxx-xx-xxxx xx:xx:xx (Example: JAN-1-2004 12:00:00)
Cause of alarm: Displays an event type and a camera channel or an alarm number (Example: VMD 5CH)
File name of alarm image:
URL: http://192.168.0.250/
It is possible to edit the contents of the alarm mail that notifies of the event occurrence with the time and date of the
event occurrence.
To edit the alarm mail, perform the following.
Step 1
Edit the contents using text editing software and save in the text format.
Depending on the item (time and date at an event occurrence, cause of alarm, host address, etc.) to be displayed,
characters to be entered will be different. Refer to the following list of characters to be replaced when editing the
contents of the mail. Save the edited mail contents with the file name "almmail.tmpl".
Step 2
Start up the FTP software and enter the IP address of the unit to connect to the unit.
Enter the user name and password as follows.
User Name: ADMIN
Password: Password entered for ADMIN on the SETUP MENU. (The default password is 12345.)
Refer to a system administrator for further information about the settings of user name and password.
Step 3
Transfer the edited file (almmail.tmpl) in the text format.
The directory to be sent is as follows.
/user/HD300/HTML_FILES
The file name of the image attached to an e-mail.
109