Download  Print this page

About The Connector; How To Use The Terminals Of The Alarm/Control Connector - Panasonic WJ-NV300K Installation Manual

Network disk recorder
Hide thumbs

Advertisement

About the connector

How to use the terminals of the ALARM/CONTROL connector

This connector is used when connecting an external device such as a sensor that outputs alarm signals or when installing an
external alarm device such as a buzzer or a lamp. The connector to be used should be compatible with the pin array.
Pin array
The pin array is different from other Panasonic recorders. Make sure
that the connection is correct referring to the following.
Pin No.
Signal
1
Alarm input 1
2
Alarm input 2
3
Alarm input 3
4
Alarm input 4
5
Alarm input 5
6
Alarm input 6
7
Alarm input 7
8
Alarm input 8
9
Alarm input 9
10
Network error output*
11
Alarm reset input
12
N/A
13
Signal ground
14
Signal ground
15
Face matching output
16
HDD error output*
17
Camera error output
18
Recorder error output*
19
Recording error
output*
20
Time adjustment
signal input
21
Alarm output
22
N/A
23
N/A
24
N/A
25
+5 V output
* Refer to the "About the error logs and the network logs" (☞ Operating Instructions (PDF)) for further information about each
error output.
Operation
Event action will be performed according to the
settings.
Signal output upon detection of a broken Ethernet
link
Canceling the alarm display
Signal output at the occurrence of a face
matching alarm
Signal output upon detection of an HDD error
Signal output upon detection of a camera error
Signal output upon detection of a recorder error
Signal output upon detection of a recording error
According to the signal input from the other
device, the time of this recorder will be adjusted
to the hour (00 minutes 00 seconds).
Alarm signal will be supplied at an event
occurrence (Except for a face matching alarm)
+5 V output
13
1
ALARM/CONTROL
25
14
Remarks
Make contact input
Open collector output
24 V DC max., –100 mA
Make contact input
Open collector output
24 V DC max., –100 mA
Make contact input
Open collector output
24 V DC max., –100 mA
200 mA max.
29

Advertisement

loading

  Related Manuals for Panasonic WJ-NV300K

This manual is also suitable for:

Wj-nv300k/g