Panasonic WJ-HD309A Operating Instructions Manual page 126

G [Monitor 2] Switcher function of monitor 2
Perform the settings for the switcher function of monitor 2.
SETUP MENU
Advanced
Monitor 1
Monitor 2
Quick Menu
8 Live Sequence
The settings for "Live Sequence" are the same as for
"Monitor1". Refer to page 124 for further information.
8 Sequence Timing
Select an image switching method from the following.
INT: Switches images according to the settings for "Live
sequence" of "Switcher".
EXT: Switches images when receiving a signal from an
external device.
Notes:
• Select "EXT" when an external device that can transmit
a sequence signal is connected.
• The sequence changeover I/O (pin no.21) of the
ALARM/CONTROL connector on the rear panel will
supply signals when "INT" is selected and will receive
signals when "EXT" is selected.
8 Auto Skip
The settings for "Auto Skip" are the same as for "Monitor1".
Refer to page 125 for further information.
8 Login Screen
The settings for "Login Screen" are the same as for
"Monitor1". Refer to page 125 for further information.
126
System Recording Event Schedule
LIVE
Switcher Display Comm Maintenance
I
Live Sequence
SETUP
I
Sequence Timing
INT
I
Auto Skip
ON
I
Login Screen
CAM1