Panasonic WJ-HD309A Operating Instructions Manual page 106

8 Shutdown Time
Select a waiting time before starting the internal processing
against the power outage after an outage detection signal
has been supplied to the unit from the following.
10 s/20 s/30 s/1 min/2 min/3 min/4 min/5 min
8 Auto Copy
ON or OFF whether or not to copy recorded images to the
copy area on the hard disk or a DVD-RAM disk automatical-
ly.
OFF: Does not copy automatically.
COPY1: Copies recorded images to the DVD-RAM disk
connected to the COPY1 port.
COPY1 (ALT): Copies recorded images with an alteration
detection code using the viewer software to the DVD-
RAM disk connected to the COPY1 port.
COPY2: Copies recorded images to the DVD-RAM disk
connected to the COPY2 port.
COPY2 (ALT): Copies recorded images with an alteration
detection code using the viewer software to the DVD-
RAM disk connected to the COPY2 port.
HDD: Copies recorded images to the copy area on the
hard disk of this unit.
Important:
• When OFF is selected, the auto copy function at an
event occurrence and emergency recording will not
function.
• The auto copy will not work if a DVD-RAM disk drive is
not connected even though "COPY 1" or "COPY 2" is
selected.
• Images recorded (by pre-event recording) in the pre-
recording area in the extension unit will not be copied
automatically.
• When emergency recording/event recordings are per-
formed frequently, it may be possible that the auto copy
function does not function.
• Images to be copied automatically will be 30 minute's
worth of images recorded from the start of emergency
recording/event recording.
G [Time & Date] Setting of the date and time
Perform the following settings of the time and date.
SETUP MENU
Advanced
Basic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
Quick Menu
8 Date Format
Select a display format for the date from the following. (Ex.
April 1, 2004)
106
System Recording Event Schedule
LIVE
Switcher Display Comm Maintenance
I
Date Format MMM.DD.YY
I
Time Format 12H
I
Time & Date
: :
JAN . 01 . 04 12 00 00 AM
SET
OFF
I
Auto Adjust Time
12 :00 AM
Master Time
AUTO
I
Summer Time(Day Light Savings)
I
Summer Time(Day Light Savings)Table
SETUP
YY.MM.DD: 04.4.1
MMM.DD.YY: APR.1.04
DD.MMM.YY: 1.APR.04
8 Time Format
Select a display format for the time from the following. (Ex.
3 o' clock in the afternoon)
12h: 3:00:00 PM
24h: 15:00:00
8 Time & Date
Adjust the current time and date.
Enter year, month, day, hour, minute and second in order,
move the cursor to "SET" and press the SET button.
Important:
Recording will stop for around 4 seconds just after set-
ting the date and time.
8 Auto Adjust Time
Select a method for auto time adjustment from the follow-
ing.
When "MASTER" is selected, a signal will be supplied from
the ALARM/CONTROL connector as the MASTER time (see
below) at the specified time.
OFF: Does not function.
MASTER: A signal will be supplied from the ALARM/CON-
TROL connector on the rear and the clock of the other
devices will be adjusted with reference to the time of
this unit.
SLAVE: A signal will be supplied to the ALARM/CONTROL
connector on the rear and the clock of this unit will be
adjusted.
Important:
Recording will not be performed for around 4 seconds
when changing the present time (accurate to within ±5
seconds) using the time adjustment input (pin no.20) of
the ALARM/CONTROL connector on the rear panel.
8 Master Time
Specify the time when supplying a signal from the
ALARM/CONTROL connector.
8 Summer Time (Day Light Savings)
Select the method of switching to summer time from the fol-
lowing.
OUT: Does not function.
IN: Applies summer time.
AUTO: Applies summer time in accordance with the setting
of summer time (see below).
8 Summer Time (Day Light Savings) Table
Do the following to specify the start time and date and the
end time and date of summer time.