Panasonic WJ-HD309A Operating Instructions Manual page 173

Problem
Cannot start recording.
Cannot record or display the
SETUP MENU of a matrix
switcher.
Cannot playback images.
Cannot control cameras.
Check item/Remedy
• Check if the HDD has any available disk space.
• Check if the recording setup is set to ON.
• Check the schedule settings.
• Check the recording priority settings.
• When the setting menu of a matrix switcher is displayed
by a non-interlace signal, the setting menu may be unable
to function normally.
Since the setting menu of the matrix switcher is displayed
by a non-interlace signal, recording or displaying the
setup menu of a matrix switcher with this unit may be
impossible.
• Check if images have been recorded on the HDD.
• Can the users record images?
Check the level settings of the users logging in.
• Can the users display camera images on the monitors?
Check the level settings of the users logging in.
• Check the connection of the camera you are going to con-
trol. Coaxial communication control is available for cam-
eras connected to VIDEO IN 1 to 8 for the WJ-HD316A (1
to 6 for the WJ-HD309A).
• Check if the camera you are going to control is a combina-
tion camera.
• Check the camera control settings.
• Can the users control the cameras?
Check the level settings of the users logging in.
• Check the BUSY indicator. When the indicator is lighting,
a higher-priority user is controlling the cameras. You can-
not control the cameras until the indicator goes out.
Page
Refer to p. 136.
Refer to p. 111.
Refer to p. 119.
Refer to p. 112.
–
Refer to p. 28.
Refer to p. 107
and 110.
Refer to p. 107
and 110.
Refer to p. 73.
Refer to p. 73.
Refer to p. 130.
Refer to p. 107
and 110.
Refer to p. 10.
173