Panasonic KX-PS8100 Operating Instructions Manual page 74

Connecting the Printer to a Network
74
4
Use the /CONTINUE button to select a number in a
valid, unique IP Address for the KX-PS8100. Press
⁄ ⁄ ⁄ ⁄ /CANCEL button to accept a number and move to the
left—to the next number.
NOTE:
•
On the printer, numbers are entered from right to left. Press the
/CONTINUE button to scroll through numbers from 0 to 9.
Press the ⁄ /CANCEL button to accept a number and move to the
next.
5
When you have finished entering all numbers in the
address, press ENTER button to advance to the Subnet
Mask screen. Press ENTER .
6
Use the /CONTINUE button to select a number as the
Subnet Mask value for the KX-PS8100. Press
⁄ ⁄ ⁄ ⁄ /CANCEL button to accept a number and move to the
left—to the next number.
7
Specify the Gateway Address in the printer's Setup
menus, if needed.
See "Network Protocol Setup" on page 148
8
When you have finished entering all numbers, press
MENU/EXIT button.
After being rebooted, the printer will return to Ready mode.
for details.