Table of Contents
Advertisement
Care and Maintenance
252
Message
Multi-Purpose Tray
Empty
NVRAM Error
Settings Changed
NVRAM Full
Settings Lost
Oil Roll
Not installed
Oil Roll
wearing out
Oil Roll
Worn out
Out of Memory
Job Cleared
Out of Memory
Job Failed
Output Tray
Full
Page
Too complex
Paper Feeder
Not installed
Parallel I/O
Buffer Overflow
PJL Operations
Failed
Corrective Action/Additional Information
Add media to multi-purpose tray.
NVRAM hardware error. Cycle Power. If
printer does not function normally, call for
service.
Hardware error of Flash DIMM. Cycle
Power. If printer does not function normally,
call for service.
Install oil web unit.
Oil supply roll will need to be replaced soon.
Replace the oil web unit.
Not enough memory to finish printing.
Change printing resolution to 600 x 600 dpi if
you selected higher resolution.
or
Install additional memory in the printer.
Not enough memory to finish printing.
Change printing resolution to 600 x 600 dpi if
you selected higher resolution.
or
Install additional memory in the printer.
Remove media from Output tray.
Not enough memory to finish printing.
Change printing resolution to 600 x 600 dpi if
you selected higher resolution.
or
Install additional memory in the printer.
Install paper feeder.
Not enough memory to finish printing.
Error in PJL code. Resend print job to the
printer.
Advertisement
Table of Contents
