Panasonic KX-PS8100 Operating Instructions Manual page 55

6
Adjust the media guides to the media size.
7
Use the printer driver to select the multi-purpose tray.
8
When using transparency with leading tape:
Remove the tape after printing.
To load an envelope in the multi-purpose tray:
Do not insert more than one envelope at a time. Only black text can be
printed on envelopes. For more detailed information,
page 294.
1
Set the media thickness switch
2
Adjust the media guides to the width of the envelope.
3
Insert the envelope with the short end entering the
printer first and the printing side facing up.
The edge where the stamp will be located enters the printer first.
NOTE: NOTE:
•
When wrinkle occurs, try printing with the envelope flap tucked in
as shown below.
4
From your computer, use the printer driver to choose
Envelope from the Paper Size menu and Paper
Source menu.
Setup
(See page 51.)
see " Envelopes" on
(see page 52).
55