Panasonic KX-PS8100 Operating Instructions Manual page 171

Bias adjustment
The printer's Bias Adjustment feature provides basic control over the
printer's color production. The Bias Adjustment screens, accessible via the
printer panel, allow you to override the printer's current toner density and
brightness settings.
Using the Bias Adjustment and calibration offset controls, you can increase
or decrease the density of cyan, magenta, yellow or black, and increase or
decrease the overall brightness of all toner colors.
To perform Bias Adjustment:
1. Print a color calibration page to confirm the current Bias Adjustment.
(See below.)
2. Compare the color calibration page with the provided Color Calibration
Card. (See page 173.)
3. Perform Bias Adjustment.
NOTE:
•
Visual Calibration and Color Adjustment settings may affect the settings
of Bias Adjustment.
— Reset VisualCal before performing the Bias Adjustment.
(See page 182.)
— Restore the settings in Color Adjustment to the default values
(all 0) before using the Bias Adjustment.
To print a color calibration page:
1
Press the MENU/EXIT button on the printer panel.
"Test Page" is displayed in the printer LCD panel.
2
Press the
•
Press twice if your printer has an optional hard disk drive.
"Bias Adjustment" is displayed in the printer LCD panel.
3
Press the ENTER button.
"Calibration Offset" is displayed in the printer LCD panel.
4
Press the
"Calibration Test Print" is displayed in the printer LCD panel.
5
Press the ENTER button.
A Color Calibration Page will be printed.
(See page 174.)
/CONTINUE button.
/CONTINUE button 5 times.
Color Calibration
(See page 185.)
(See page 172.)
171