Table of Contents
Advertisement
To compare current setting with the color density samples:
1
Compare the current color density settings on the Color
Calibration Page with the color density samples on the
Color Calibration Card to see if they match.
Place the Color Calibration Page on at least 2 sheets of clean white
paper in a well-lighted area.
Color Calibration Card
•
If they match, then you do not need to adjust the color density
and you may proceed with any operation you wish to perform.
•
If they do not match,
page
174.
2
Determine which block on the Color Calibration Page
most closely matches the density of the cyan sample on
the Color Calibration Card.
Repeat step 2 for each color.
Color Calibration Page
proceed to "To perform Bias Adjustment:" on
Color Calibration
Clean white paper
(at least 2 sheets)
173
Advertisement
Table of Contents
