Printing A Test Print From The Printer Panel - Panasonic KX-PS8100 Operating Instructions Manual

Printing a Test
Print from the
printer panel
There are several pages that you can print from the printer panel. This
section provides instructions for printing a Test Print.
The Test Print includes a color sample as well as the printer's name,
enabled network protocols, memory configurations, and installed options.
You can print a Test Print before you set up the KX-PS8100 system—or at
any other time from the "Ready" or the "Ready(Sleep)" screen.
To print a Test Print:
1
Turn on the printer and allow it to warm up.
Messages appear on the printer panel as the KX-PS8100 printer
runs through its power-up tests.
2
From the Ready screen, press the MENU/EXIT button
on the printer panel.
3
Press the ENTER button.
4
Press the
and then press the ENTER button.
5
Examine the quality of the Test Print.
For more information,
/CONTINUE button until you see Test Print
Calibration: NO
Panasonic KX-PS8100
Configuration
Printer Name: KX-PS8100
Resolution: 600 dpi x 600 dpi
Printer Language(s): PS3
Memory
Installed Memory (RAM): 32MB
Disk: Not Installed
Test Print
see page 202 .
Setup
69