Table of Contents
Advertisement
To clear media jams in location C:
1
Open the printer's front door.
.
SAFETY CAUTION:
•
The fuser is hot; to avoid personal injury, turn off the printer and
wait 10 minutes (after opening the printer's front door) for the
fuser to cool before touching it.
2
Check whether the media is jammed under the color
imaging unit.
•
If the media is jammed, remove it by following the steps 1 to 4 in
"To clear media jams in location B with media tray" on
and then go to the next step.
•
If it isn't, go to the next step.
3
Turn the small green thumbscrew counterclockwise to
unlock the fuser.
.
Care and Maintenance
Jammed media
page 224
225
Advertisement
Table of Contents
