Table of Contents
Advertisement
3
a) Align the network card into the cutout in the front
bracket.
b) Insert the network card into the network card
connector.
c) Secure the network card to the front bracket using
the two screws you removed from the slot cover.
Network card
[The figure is Ethernet
(KX-PNBC5) card.]
a
c
4
Replace the printer controller board in the printer.
For instructions,
board" on page
5
Connect the printer to a network.
For instructions,
Network".
b
see "Removing and replacing the printer controller
273.
see Chapter 3 "Connecting the Printer to a
Options
283
Advertisement
Table of Contents
