Table of Contents
Advertisement
Trouble
The setting for printing
is not effective.
If you can't make a duplicate:
Trouble
You cannot duplicate using
the scanner panel when
Macintosh 7500/7600/
8500/9500, the scanner
and the printer are
connected using the SCSI
cables.
Media problems
Trouble
Frequent paper-
picking errors.
Care and Maintenance
Possible Cause
Some applications
may not allow you to
change the settings
through the KX-
PS8100 printer
driver's setting
window.
Corrective Action
Make sure that the computer is turned ON.
Disconnect KX-PS8100 from the computer
and change the terminator setting
accordingly.
(See page
66.)
Corrective Action
Fan the paper or transparencies before installing
them in their respective trays; this is especially
important for transparencies because they tend to
stick together.
Make sure that you have loaded paper in the paper
tray and transparencies in the transparency tray.
Make sure that the media is installed under the
hooks at the front of the media tray.
If printing on transparencies and your printer has a
2nd cassette feeder, make sure that the
transparency tray is installed in the upper or middle
tray slot.
Clean the paper-pick rollers.
directions.)
Corrective Action
Change the
application's settings.
(See page 211
for
243
Advertisement
Table of Contents
