Table of Contents
Advertisement
Message
ADF top cover open.
Close the ADF top cover.
Memory OverFlow
Add SDRAM to Printer
Memory OverFlow
Select Lower Quality
No detection marker in ADF
Remove document from
ADF tray.
SCSI error
Saving
Loading
Care and Maintenance
Corrective Action/Additional
Information
ADF top cover is open.
Close the ADF top cover.
Print memory is not enough for
duplicating.
Press the RESET/STOP button to return
to "Ready".
Add memory to printer.
Print memory is not enough for
duplicating.
Press the RESET/STOP button to return
to "Ready".
Select a lower quality.
The white sheet is dirty.
Clean the white sheet.
A document is placed in the ADF tray
when power is turned on.
Remove the document from the ADF tray.
A document is placed in the ADF tray
when a jam is cleared.
Remove the document from the ADF tray.
Communication cannot be established
between the scanner and printer.
Connect the SCSI cable correctly.
or
Make sure that the computer connected
with the SCSI cable is turned on.
Scanner is saving the data using
DataSave function.
Scanner is loading the data using
DataLoad function.
247
Advertisement
Table of Contents
