Installing Software for Windows
104
NOTES:
•
Before installing the software to Windows 98, make sure that the
provided/not provided SCSI cable and parallel interface cable are
connected properly between KX-PS8100 and your computer.
For connecting the SCSI cable, refer to step 1 to 6
For connecting the parallel interface cable, refer to step 1 to 3
•
The order of installing each device depends on what is detected first.
1
Turn on the printer, then the scanner.
2
When the "Ready" is displayed on the printer's LCD,
turn on the computer and start Windows 98.
•
If "Unknown Device" is displayed, go to "To install the scanner
driver and utilities"
•
If "Panasonic KX-PS8100" is displayed, go to "To install the
PostScript printer driver"
(page
105).
(page
110).
(page 60
to 62).
(page
64).