Table of Contents
Advertisement
Installing Software for Windows
102
Using Plug and Play
1
Turn on the printer, then the scanner.
2
When the " Ready " is displayed on the printer's LCD, turn
on the computer and start Windows 95.
The New Hardware Found window is displayed for a few seconds,
then the Update Device Driver Wizard window is displayed.
3
Insert the KX-PS8100 CD-ROM Disc2 in your CD-ROM
drive.
Click [NextÃ] .
4
Click [Other\Locations...] .
5
The Select Other Location window is displayed.
6
Type "X*:\WIN32\DISK1".
* CD-ROM drive name differs depending on your computer.
Click [OK] .
7
The Update Device Driver Wizard window is displayed.
Click [Finish] .
8
The Choose Setup Language window is displayed.
Select the language, and click [OK] .
9
Wait until the Welcome window is displayed.
10
Follow the instructions on the screen to complete the
installation.
After installation, restart your system.
NOTE:
•
The Plug and Play installation procedure varies depending on the version
of Windows 95. Refer to Help in Windows 95.
Advertisement
Table of Contents
